BS EN 558-2 1996
|
ID： |
88CB257867CA49209FC7EC4B148CC86B |
|
文件大小(MB)： |
0.26 |
|
页数： |
30 |
|
文件格式： |
|
|
日期： |
2013-6-1 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,558-2:1996,Industrial valves —,Face-to-face and,centre-to-face,dimensions of metal,valves for use in flanged,piping systems —,Part 2: Class-designated valves,The European Standard EN 558-2:1995 has the status of a,British Standard,ICS 23.060.00,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Mon Jul 23 10:26:08 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,BS EN 558-2:1996,This British Standard, having,been prepared under the,direction of the Engineering,Sector Board, was published,under the authority of the,Standards Board and comes,into effect on,15 May 1996,. BSI 06-1999,The following BSI references,relate to the work on this,standard:,Committee reference PSE/7,Draft for comment 91/81549 DC,ISBN 0 580 24721 X,Committees responsible for this,British Standard,The preparation of this British Standard was entrusted to Technical,Committee PSE/7, Valves, upon which the following bodies were represented:,Amalgamated Engineering Union,Association of Bronze and Brass Founders,British Foundry Association,British Gas plc,British Plumbing Fittings Manufacturers’ Association,British Valve and Actuator Manufacturers’ Association,British Water,Chartered Institution of Building Services Engineers,Electricity Association,Energy Industries Council,Engineering Equipment and Materials Users’ Association,GAMBICA (BEAMA) Ltd.,Health and Safety Executive,Institution of Mechanical Engineers,LP Gas Association,Pipeline Industries Guild,Society of British Water Industries,Water Services Association of England and Wales,West Midlands CBI,Coopted members,Amendments issued since publication,Amd. No. Date Comments,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Mon Jul 23 10:26:08 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,BS EN 558-2:1996,. BSI 06-1999 i,Contents,Page,Committees responsible Inside front cover,National foreword ii,Foreword 2,Text of EN 558-2 3,List of references Inside back cover,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Mon Jul 23 10:26:08 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,BS EN 558-2:1996,ii . BSI 06-1999,National foreword,This British Standard has been prepared by Technical Committee PSE/7 and is,the English language version of EN 558-2:1995 Industrial valves —,Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe,systems — Part 2: Class-designated valves, published by the European Committee,for Standardization (CEN). EN 558-2 was produced as the result of international,discussions in which the United Kingdom took an active part.,Together with BS EN 558-1:1989, it partially supersedes BS 2080:1989, which,has been amended.,A British Standard does not purport to include all the necessary provisions of a,contract. Users of British Standards are responsible for their correct application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,Cross-reference,Publication referred to Corresponding British Standard,EN 26554:1991 BS EN 26554:1991 Specification for face-to-face,dimensions for flanged automatic steam traps,Summary of pages,This document comprises a front cover, an inside front cover, pages i and ii,the EN title page, pages 2 to 24, an inside back cover and a back cover.,This standard has been updated (see copyright date) and may have had,amendments incorporated. This will be indicated in the amendment table on the,inside front cover.,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Mon Jul 23 10:26:08 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 558-2,March 1995,ICS 23.060.00,Descriptors: Industrial valves, valves-and fittings, flanged valves, metallurgical products, dimensions, dimensional tolerances,English version,Industrial valves — Face-to-face and centre-to-face,dimensions of metal valves for use in flanged pipe,systems —,Part 2: Class-designated valves,Robinetterie industrielle — Dimensions,face-à-face et face-à-axe de la robinetterie,métallique utilisée dans les systèmes de,canalisations à brides —,Partie 2: Appareils de robinetterie désignés,Class,Industriearmaturen — Baul鋘gen von,Armaturen aus Metall zum Einbau in,Rohrleitungen mit Flanschen —,Teil 2: Nach Class bezeichnete Armaturen,This European Standard was approved by CEN on 1995-10-16. CEN members,are bound to comply with the CEN/CENELEC Internal Regulations which,stipulate the conditions for giving this European Standard the status of a,national standard without any alteration.,Up-to-date lists and bibliographical references concerning such national,standa……
……